Complete LED lighting system with adapter for the Reflexio hairdressing station (4.60 m). The light band can be easily retrofitted. It significantly enhances the styling area and provides indirect lighting.
»
Warnings and safety instructions
Before using the appliance for the first time, read the operating instructions in full and familiarise yourself with the appliance.
Safety and warning instructions
-
This device is intended solely for use as a decorative or functional sign in hair salons. It must not be used for any other purpose.
-
Use the device only with the specified voltage (as described in the operating instructions).
-
Do not connect the Barber Pole to damaged or faulty sockets.
-
The Barber Pole is not a toy. Keep it out of reach of children to avoid injury or damage.
-
Only use the device in safe, stable and dry locations that do not pose a danger to passers-by.
-
Make sure that the Barber Pole is securely attached to prevent it from falling or tipping over.
-
Barber poles are only suitable for indoor or protected outdoor use if they are explicitly labelled as weather-resistant. Do not use the device in direct wet conditions or during extreme weather conditions.
-
Install the device according to the manufacturer's instructions. If you are unsure, the installation should be carried out by a professional, especially when it comes to electrical wiring.
-
Do not allow objects or clothing to become caught in the rotating parts. This could damage the mechanism or cause injury.
-
Switch off the device before cleaning and disconnect it from the power source. Use a soft, dry cloth and do not use abrasive cleaning agents.
The Barber Pole's lighting can get hot. Do not touch the device during operation on hot surfaces, especially on bulbs or LED modules.
Do not use the device if it shows signs of damage (e.g. to cables, bulbs, rotating parts or the housing). Only have repairs carried out by a specialist.
Never let children play with the packaging material. It can cause suffocation.
Disposal instructions
-
The Barber Pole contains electrical components and must not be disposed of in normal household waste. Dispose of it in accordance with local regulations for the disposal of electrical and electronic equipment (WEEE Directive).
-
Defective or replaced bulbs/LED modules should be treated as hazardous waste and disposed of at appropriate collection points.
