Read the operating instructions completely and familiarise yourself with the device before initial operation.
DANGER! Risk of death by electric shock, fire or explosion! Contact with live wires or components poses a risk of death! If the live device comes into contact with water, there is a risk of death!
-
Make sure that the voltage (V) on the device's type plate matches the mains voltage!
Do not pull the power cable over sharp edges, trap it or let it hang down. The power cable must be protected from heat and moisture. The power cable must not be stretched or strained.
The power cable must not touch any hot parts of the device!
Always switch off the device after use!
Only insert the plug into the socket when the device is switched off!
Never wrap the power cord around the device!
Always unplug the power plug when cleaning the device, in the event of a malfunction, or when not in use!
Do not place the device or power cord on hot surfaces such as stove tops or similar, and keep it away from open flames!
Before each use, check that the device is in perfect condition. It must not be used if: - it is not working properly - the supply cable is damaged - the device shows visible damage - the device has been dropped once - or if it has fallen into water.
If the power cable is damaged, it may only be replaced by the manufacturer, its customer service or a qualified electrician in order to avoid a hazard!
Repairs may only be carried out by an authorised service centre or by a qualified electrician using original spare parts.
Never immerse the device in water.
The device must NOT be cleaned under running water!
Do not use this appliance near a bathtub, shower tray or other vessel containing water.
When the appliance is used in a bathroom, unplug the appliance after use because the proximity of water poses a hazard even if the appliance is switched off.
Do not unplug the power plug from the socket by the power cord or with wet hands!
To prevent hazardous situations caused by accidentally resetting the thermal cut-out, this appliance must not be connected to an external switching device, such as a timer, a power outlet with unstable or intermittent power supply, or a circuit that is regularly switched on and off by the utility company.
Never use the device in environments where there is a high concentration of aerosol (spray) products or where oxygen is released.
Never use the device with aerosol (spray) products labelled as flammable.
Protect the device from dust, dirt and lint.
Do not use harsh or abrasive cleaning agents.
Wipe the device with a slightly damp cloth and dry with a soft cloth.
As an additional safety measure, the installation of a tested residual current device (RCD) with a rated tripping current of not more than 30 mA in the circuit is recommended. Ask your electrician for advice.
Caution! Damage due to improper handling.
-
This device is intended solely for the curing of UV- or LED-curing materials (such as nail gels or gel polishes). Do not use it for any other purpose.
-
Caution: Direct UV radiation can damage skin and eyes. Do not look into the light and use protective gloves.
-
People with open wounds, skin irritations, skin diseases or sunburn should not use the device, as the UV radiation can worsen the symptoms.
-
UV light can damage the skin and eyes. Avoid direct eye contact with the light sources and keep the device out of the reach of children.
Use protective gloves or UV-blocking products if you have sensitive skin or are known to be sensitive to UV.
Use only for UV or LED-curing products.
Allow the device to cool between uses, especially during extended sessions. Overheating the device can shorten its lifespan or cause damage.
Do not use or store the device in humid environments.
Regularly inspect the function of the lamps or LED light sources. Replace defective lamps or device components only with manufacturer-approved replacement parts.
Store the device in a dry, well-ventilated location. Do not expose it to extreme temperatures or moisture.
Disposing of waste electrical products at end of life
-
Dispose of lamps (e.g. LED) in accordance with the local disposal regulations for lamps.
-
Do not dispose of electrical products in domestic waste. In accordance with European Directive 2012/19/EU on waste electrical and electronic equipment and its transposition into national law, used electrical equipment must be collected separately and recycled in an environmentally friendly manner. Recycling alternative to the return request: The owner of the electrical device is alternatively obliged to cooperate in the proper recycling of the device in the event of abandonment of ownership instead of returning it. The old device can also be left to a collection point that carries out disposal in accordance with the national recycling and waste management law. This does not apply to accessories and aids without electrical components that are included with the old devices. The product packaging consists of recyclable materials. Please dispose of these in an environmentally friendly manner and send them for recycling.
