Read the operating instructions completely and familiarise yourself with the device before initial operation.

DANGER! Risk of death by electric shock, fire or explosion! Contact with live wires or components poses a risk of death! If the live device comes into contact with water, there is a risk of death!
Do not pull the power cable over sharp edges, trap it or let it hang down. The power cable must be protected from heat and moisture. The power cable must not be stretched or strained.
The power cable must not touch any hot parts of the device!
Always switch off the device after use!
Only insert the plug into the socket when the device is switched off!
Never wrap the power cord around the device!
Always unplug the power plug when cleaning the device, in the event of a malfunction, or when not in use!
Do not place the device or power cord on hot surfaces such as stove tops or similar, and keep it away from open flames!
Before each use, check that the device is in perfect condition. It must not be used if: - it is not working properly - the supply cable is damaged - the device shows visible damage - the device has been dropped once - or if it has fallen into water.
If the power cable is damaged, it may only be replaced by the manufacturer, its customer service or a qualified electrician in order to avoid a hazard!
Repairs may only be carried out by an authorised service centre or by a qualified electrician using original spare parts.
Never immerse the device in water.
The device must NOT be cleaned under running water!
Do not use this appliance near a bathtub, shower tray or other vessel containing water.
When the appliance is used in a bathroom, unplug the appliance after use because the proximity of water poses a hazard even if the appliance is switched off.
Do not unplug the power plug from the socket by the power cord or with wet hands!
To prevent hazardous situations caused by accidentally resetting the thermal cut-out, this appliance must not be connected to an external switching device, such as a timer, a power outlet with unstable or intermittent power supply, or a circuit that is regularly switched on and off by the utility company.
Never use the device in environments where there is a high concentration of aerosol (spray) products or where oxygen is released.
Never use the device with aerosol (spray) products labelled as flammable.
Protect the device from dust, dirt and lint.
Do not use harsh or abrasive cleaning agents.
Wipe the device with a slightly damp cloth and dry with a soft cloth.
As an additional safety measure, the installation of a tested residual current device (RCD) with a rated tripping current of not more than 30 mA in the circuit is recommended. Ask your electrician for advice.

Caution! Damage due to improper handling.
Use protective gloves or UV-blocking products if you have sensitive skin or are known to be sensitive to UV.
Use only for UV or LED-curing products.
Allow the device to cool between uses, especially during extended sessions. Overheating the device can shorten its lifespan or cause damage.
Do not use or store the device in humid environments.
Regularly inspect the function of the lamps or LED light sources. Replace defective lamps or device components only with manufacturer-approved replacement parts.
Store the device in a dry, well-ventilated location. Do not expose it to extreme temperatures or moisture.

Disposing of waste electrical products at end of life